If you clean drains or unblock drains for a living, Airless & Pressure Cleaner Services has a wide range of Jetters, Jetting Nozzles , Root Cutting Nozzles, Premium Jet Hose and Hose Reels from leading brands including Spitwater, The Jetters Edge, Blast-Jet and Mustang Australia.
Based in Townsville we service businesses in all industries in the area bordered by Bowen in the south, Charters Towers in the west and Ingham to the north. If you are outside the North Queensland area you can call us and we will help you over the phone and even arrange delivery direct to your door.
Drain Mate
Entry level drain cleaning
- 3650 PSI at 21 L/min
- 23HP Honda engine with electric start
- (3 yr wrnty)
The Wombat
Mid level drain cleaning
- 4000 PSI at 21 L/min
- 23HP Honda engine with electric start
- (3 yr wrnty)
Taipan 5000
Premium drain cleaning
- 5000 PSI at 23 L/min
- 23HP Honda engine with electric start
- (3 yr wrnty)
Jetter Accessories
Mustang
Remote Mini Hose Reel
50 or 60m hose
Light weight electro-polished stainless frame with corrosion protection, 3 nozzle holders and Mustang 3/16″ hydro-jet thermo plastic jet hose with a stainless silt proof quick connect coupler on the hose end with an extended Mustang stainless steel ball valve handle. Rated to 5000 psi. Nozzles ordered seperately.
Part No: MR WH (50m hose)
Part No: MR WH60 (60m hose)
Mustang
Nozzle Box Kit
Mustang Nozzles Budget Kit
7 piece budget nozzle kit.
Part No: MNBKB
Mustang Nozzles Deluxe Kit
15 piece deluxe nozzle kit.
Part No: MNBKD
General Nozzles
Bandit Nozzle
Computer designed nozzle to enter a blockage quickly with maximum thrust. Recommend using a speed cone with this nozzle. 6 rear jets at a tight angle and 1 front jet.
Part No: BT6R1F
Bandit Nozzle 3/8″
Part No: BT6R1F10
Bandit Nozzle 1/2″
Part No: BT6R1F12
Screwdriver Nozzle
Features a blade at the front of the nozzle with an offset jet so you can clear most stubborn blockages just by twisting the hose. Also has 6 rear thrusting jets.
Part No: SD 6R1F
Screwdriver Nozzle 3/8″
Part No: SD 6R1F10
Screwdriver Nozzle 1/2″
Part No: SD 6R1F12
Beaver Nozzle
2 offset forward facing jets that help penetrate at the front of the nozzle and 6 rear jets to quickly thrust the nozzle to the blockage. Has reduced thrust due to 2 front jets.
Part No: BV6R2F
Ferret Nozzle
2 offset forward facing jets that help penetrate at the front of the nozzle, 3 rear jets on the side and 3 jets at the back of the nozzle. Has reduced thrust due to 2 front jets.
Part No: F6R2F
Bullet Nozzle
This is a great nozzle for penetrating tight blockages because the nozzle is forward of the cone helping it to burrow deep into the choke. 3 compressor tips available.
Part No: B6R1FC
Grease Ball Nozzle
Totally spherical with 8 rear thrusting jets only. Designed for extreme thrust and the ability to clean grease off the sidewall of pipes but has proven to be effective on root chokes.
Part No: GB8
Compressor Penetrator Nozzle
3 large rear jets and 1 forward jet.
Part No: C3R1F
Compressor Invader Nozzle
Great penetrating thruster with 6 rear jets and 1 forward jet.
Part No: C6R1F
Compressor Thruster Nozzle
6 rear thrusting jets only.
Part No: C6R
Negotiator Penetrator Nozzle
3 large rear jets and 1 forward jet.
Part No: N3R1F
Negotiator Invader Nozzle
Great penetrating thruster with 6 rear jets and 1 forward jet.
Part No: N6R1F
Negotiator Thruster Nozzle
6 rear thrusting jets only.
Part No: N6r
Predator Penetrator
Nozzle
3 large rear jets and 1 forward jet.
Part No: P3R1F
Predator Invader Nozzle
Great penetrating thruster with 6 rear jets and 1 forward jet.
Part No: P6R1F
Predator Thruster Nozzle
6 rear thrusting jets only.
Part No: P6R
Root Rat Nozzle
This is a popular nozzle because of its jet configuration. 1 forward, 3 behind the nose at 45° and 3 at the rear at 30°. It will open a blockage quickly and thoroughly.
Part No: RR 6R1F
Rotating Nozzle
3 rotating rear jets, stainless steel, 1/4″ Bsp F, 3650 psi. Available in the following sizes: 040, 045, 055 and 065.
Part No: MV846
Cone & Tail 1/4″
Part No: CT 8
Cone & Tail 1/8″
Part No: CT 4
Hose Tail 1/4″
Part No: HT 8
Hose Tail 1/8″
Part No: HT 4
PVC Wear Cone 1/4″
Part No: PC 8
PVC Wear Cone 1/8″
Part No: PC 4
3 large rear jets and 1 forward jet.
Part No: C3R1F
Stainless Steel Quick Release
1/4″ with patented double silt proof o’ring
Part No: QR8SS
Brass Quick Release
Part No: QR8SS
Root Cutters
Root Ranger
Root cutting turbine with removable front plug and quick connect adaptor.
Part No: RR 8TC
Large Root Ranger
1/2″ root cutting turbine. Adaptor available to quick connect or screw into 1/4″ hose. Flow rate from 21 LPM to 90 LPM.
Part No: LRR8TC
Double Barrel Root Ranger
Twin root cutting turbines with quick connect adaptor.
Part No: RRD8
Root Ranger Front Jet
Removable front ceramic jet with flow straightener in body.
Part No: M6J
Root Ranger Extension
Prevents the nozzle from turning up inspection caps.
Part No: WGS25
Root Ranger Repair Kit
Replacement ceramic insert.
Part No: RTRK8
Replacement Turbine
Suit Root Ranger. Can be used on the end of hand lances.
Part No: LT83055
Replacement Turbine Large
Part No: T83
180° Pressure Bend
With front plug only. Suit Root Ranger.
Part No: LSS8TM
180° Pressure Bend Large
Part No: SS8TM
